YONGNUO YN560 IV Wireless Flash Speedlite Master + Slave Flash + Built-in Trigger System for Canon Nikon Pentax Olympus Fujifilm Panasonic Digital Cameras
The YN 560IV speedlight took the 560III and introduced a built in controller as well. Now you can have it all in one nice package. Complete wireless radio signal control is built into the speedlight. Using this as a master flash you can control up to 3 groups of speedlights, 560iii or 560iv. You can make all the adjustment to the power output from this speedlight and it will send the information to the ones that you are using off camera. No need to walk over to make those adjustments.. Portrait photographers, Real Estate photographers and more love this speedlight for its ease of use and its tremendous light output.
Supports Wireless Master Function
The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III.
Supports Wireless Slave Function,
Fully supports YN560-TX、RF-603(I/II)、RF-602 Wireless transmitter One YN560 IV can respectively receive the wireless signal from YN560 IV、YN560-TX、RF-603 (I/II)、RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings.
Multiple Trigger Synchronous Mode Supported
The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode.
Settings Save Automatically, Supports Custom Settings (Fn)
The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.
Sound Prompting System When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting.
YONGNUO YN560IV Wireless Flash Speedlite, GN58 Manaul Multi Master + Slave Flash, Built-in Trigger System, Negative LCD Screen
YN-560 IV Flash Speedlite is a combination of YN-560 III and YN560-TX II, it has built-in wireless trigger system, so you can not only use it as flash speedlite, but also a flash controller Transmitter.
- Supports USB Firmware Upgrade.
- Supports Wireless Master Function.
- Supports Wireless Slave Function, fully supports YN560-TX, RF-603 II RF-602 Wireless Transmitter.
- Supports Multiple Trigger Synchronous Mode.
- Supports setting save automatically, custom settings ( fn ).
- GN58@ISO100, 105mm ( M / Multi mode ).
- Supports ultra-fast charging recycle system, External power supply.
About this item
- YN560 IV=YN560III+YN560-TX, Supports Wireless Master Function.
- YN-560 IV can be used as master unit, provides 3 independent groups with controlling abiligy, realizing remote control the flas mode, flash output, and focal length of YN-560 IV and YN-560 III
- One YN-560 IV can receive the wireless signal from YN560 IV, YN560-TX, RF-603 II and RF-602, with optical 16 channels. When YN-560 IV and YN560-TX used as transmitter, it can realize remote control and parameter settings.
- It can be triggered through the flash mounted on the camera, 2.4G wirless triggering system, S1 and S2 pre flash cancel mode.
- Supports setting save automatically, custom settings ( fn ). GN58@ISO100, 105mm ( M / MUlti mode ). Supports ultra-fast charging recycle system, External power supply.