Configuring the Phone cooler
1. Download and install the app.
Black Shark phone support performing configuration in the Shark Space. There is no need to download the app. And please make sure the OS version of the phone is the latest.
2. Use the Phone cooler.
1) Attach the Phone fun to the back of your phone and keep it as close as possible to your phone. When installing, watch out the buttons on the side of the phone.
2) Connect the adapter to the Phone cooler through the USB-C cable. Make sure the output power of the adapter is 5V 2A or higher. Once the power is on, you can view the temperature data on the Digital Display, and the fun enters Bluetooth pairing mode. If no phone connect to the cooler, the green light will flash for 30 seconds, and then the lighting effect will be restored to the user settings or factory default mode. And Bluetooth pairing mode will always be on.
3. (Optional)* Configure the Phone cooler.
1) Turn on Bluetooth on the phone, and connect the Mobile cooler in the Shark Space or app.
2) Set the lighting effect and cooling mode. Also, you can view the temperature data of the Phone cooler in Shark Space or the app.
*If “(Optional) Configure the Phone cooler” is not performed, the working mode of cooler will be the minimum level.
*When the Phone fun is working, the temperature of the device decreases. Then the warm and humid air will condense into water droplets and attach to the surface of the cooler. This is normal
4. Using the Phone cooler with Black Shark 4
• Option 1: When the Mobile cooler is using with Black Shark 4 without phone case, there must be no silicone arm case on the cooler arms.
• Option 2: When the Phone fun is using with Black Shark 4 and Black Shark 4 FunCase together, you need install a pair of Special silicone arm cases on the cooler arms.